SIGHTPICTURE

HOME AR  PARTS  &  ACCESSORIES RIFLE  SCOPES & RINGS NIGHT  VISION & THERMAL NV VESTS  &  HOLSTERS
SPECIALS / CLOSEOUTS AR  UPPERS & LOWERS RED  DOT  &  REFLEX  SIGHTS HANDGUARD - FOREARM MOUNTING  SYSTEMS FLASHLIGHTS - LASERS - RANGEFINDERS - BINOCULARS RIFLES  &  HANDGUNS

SPECIALS / CLOSEOUTS

AR  PARTS  &  ACCESSORIES

RED DOT - REFLEX SIGHTS

AR  UPPERS & LOWERS

RIFLE  SCOPES

VESTS  &  HOLSTERS

HANDGUARD - FOREARM MOUNTING SYSTEMS

FLASHLIGHTS - LASERS - RANGEFINDERS - BINOCULARS

NIGHT  VISION

RIFLES  &  HANDGUNS


AR  PARTS  &  ENHANCEMENTS

   SIDE  CHARGER  RECEIVERS

 

 American Spirit Arms logo

AMERICAN SPIRIT ARMS


AR-15 M4

Left Side Charger Upper Receiver with Modified Carrier can be used with a .223/5.56, 6.5 Grendal, 6.8 SPC II, 300 AAC Blackout and 7.62x39mm BOLT

Left hand side charger does not reciprocate when fired.

- BOLT NOT INCLUDED -

Description

PATENT PENDING

At American Spirit Arms we're proud to offer our industry-leading Side Charger Receiver. This receiver was designed as one of the most highly desired options for the AR-15. By relocating the charging action to the side, as opposed to the rear of the receiver, the shooter can maintain a sight position and shooting position while charging the chamber with ammunition. Additionally, the charging handle on our side charger receiver does not reciprocate with the action of the bolt. This provides a much safer operation than the alternative.

  • Forged Flat Top Side Charger Upper Receiver

  • Mil-Std 1913 Rail

  • Assembled with the highest quality mil-spec components

  • Includes Modified Carrier with Gas Key

  • Lifetime Warranty

  • All you need to buy is a bolt;  .223/5.56, 6.5 Grendal, 6.8 SPCII, 300 AAC Blackout or 7.62x39mm

ITEM# SP-ASA-URFTSC

$459.00

Quantity:      

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AR-15 M4 

Right Side Charger Upper Receiver with Modified NATIONAL MATCH Bolt Carrier with NM Bolt

YOUNG MANUFACTURING

NATIONAL MATCH SIDE CHARGE UPPER RECEIVER

WITH BOLT CARRIER WITH BOLT FOR .223/5.56 & 300 AAC BLACKOUT 

ITEM# SP-YM-SCBC-BOLT

$459.00

Quantity:      

NATIONAL MATCH SIDE CHARGE UPPER RECEIVER

can be used with a .223/5.56, 6.5 Grendal, 6.8 SPC II, 300 AAC Blackout and 7.62x39mm BOLT

WITH BOLT CARRIER & KEY ONLY

-  NO BOLT or COMPLETION KIT -

ITEM# SP-YM-SCBC-NOBOLT

$399.00

Quantity:      

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Crosshill Technologies

AR-15 M4

XSR-15 AMBIDEXTROUS SIDE-CHARGING UPPER RECEIVERS ASSEMBLY

The XSR-15 Side Charging Receiver Assembly is a custom AR builders dream come true. This rigid custom receiver is made from rugged 7075 T6 Grade Billet Aluminum. The finish is Military Grade type III Hard Coat Anodizing and Black Teflon top coat. The XSR-15 features a longer 1913 Picatinny Rail, wider ejection port, tightened tolerances, thick wall construction and Ambidextrous Side Charging Handles and Right Side Ejection Port. These features allow for greater scope variety and mounting capabilities. Useable with a larger variety of compatible calibers without modification. Simplicity of use and accuracy.

The XSR-15 will fit and accept any Mil-Grade/Mil-Spec lower receiver (with exchange of the standard bolt catch to the provided modified bolt catch). The Bolt Carrier Group (B.C.G.) is our dedicated Custom Side-Charging Carrier with certified .223/5.56 Bolt, Cam Pin, Firing Pin, Firing Pin Retaining Pin, Custom Side-Charging Handles, Timing Bolt/Gas Stop and Modified Bolt Catch w/ Roll Pin.


(XSR-15-A-A-B) XSR-15 AMBI ANODIZED RECEIVER W/ BLACK NITRIDE CARRIER & PHOSPHATE BOLT

ITEM# SP-CH-XSR15AAB

$349.95

Quantity:      

(XSR-15-A-A-N) XSR-15 AMBI ANODIZED RECEIVER W/ NiB CARRIER & PHOSPHATE BOLT

ITEM# SP-CH-XSR15AAN

$374.95

Quantity:      

(XSR-15-A-N-B) XSR-15 AMBI NICKEL BORON RECEIVER W/ BLACK NITRIDE CARRIER & PHOSPHATE BOLT

ITEM# SP-CH-XSR15ANB

$374.95

Quantity:      

(XSR-15-A-N-N) XSR-15 AMBI NICKEL BORON RECEIVER W/ NiB CARRIER & PHOSPHATE BOLT

ITEM# SP-CH-XSR15ANN

$374.95

Quantity:      

 

 

 

 

 

 

 

G4 Side Charging Upper Receiver NON-RECIPROCATING

RIGHT HAND

 

LEFT HAND

 

ENHANCED CAM PIN WITH RIGHT HAND RECEIVER

It features a non-reciprocating right & left side charging handle that is located in the front of the
receiver to allow charging of the firearm while looking down the sights. It also allows the operator to pull the bolt back and activate the bolt stop with one hand. 

The G4 upper uses all standard mil-spec and many aftermarket bolt carrier assemblies with the use of an enhanced cam-pin optimized for our side charge upper. Our cam pin is manufactured with the same material and heat treat process as the mil-spec pin.

The G4 upper uses a bolt carrier door where the traditional charging handle is to allow for the removal of the bolt carrier assembly when the firearm is opened for cleaning. When closed and during the normal function of the firearm the door keeps dust and dirt out of the action and shields the operator from the operating gasses. This is especially important for shooter with a suppressor.

  • Patented Side Charging Upper for the AR platform

  • Non-reciprocating  Charging handle with detent to keep the charging handle forward during operation.

  • Works with all Mil-Spec Bolt Carrier Groups and most aftermarket BCG with a swap of our included Enhanced Cam Pin
    Available in Right and Left handed versions

  • They come with standard or enlarged ejection ports for calibers from 5.56 to 458 SOCOM 

  • Bolt carrier door in the rear to allow for easy bolt carrier removal, but keeps dust and debris out during operation.

  • Full 15 Slot Picatinny Rail Compatible with all Mil-Spec and most other lowers receivers

  • Made in the USA (Arizona)


RIGHT HAND UPPER RECEIVER WITH ENHANCED CAM PIN

ITEM# SP-GIB-G4UR

$249.95

Quantity:      

LEFT HAND UPPER RECEIVER WITH ENHANCED CAM PIN

ITEM# SP-GIB-G4URLH

$249.95

Quantity:      

ENHANCED CAM PIN

ITEM# SP-GIB-G4CP

$11.50

Quantity:      

 

TRIGGERS

  Tac-Con Triggers

       TAC-CON  TRIGGER  VIDEO                                  ATF COMPLIANCE         

AR-15 Tac-Con™ 3MR with Right, Left and Ambi

Handed Selector

Description

The 3MR trigger assembly for an AR-15 with a right-handed selector is compatible with weapons using AR-15 small pin .154" mil-spec style fire control groups. The right-handed selector paddle will be on the left side of the rifle.

The 3MR is a drop-in 3-mode fire control system with Safe, Semi-Automatic, and Tac-Con™'s patented 3rd Mode. The 3rd mode has a positive reset that dramatically reduces the split times between shots. The positive reset characteristic is achieved by transferring the force from the bolt carrier through the trigger assembly to assist the trigger back onto the front sear. As a result, this gives the firearm the fastest reset possible. Both semi and 3rd mode positions exhibit a non-adjustable 4.5 pound trigger pull weight.

*Comes with Right Handed Selector Product Code: 3MRRH5102

Specifications

FEATURES
3 Mode Drop-In trigger
3rd Mode is Positive Reset
Semi-Auto is a Match Grade
Pull Rate 4 1/2 Pounds
Zero Take-Up & No Overtravel

CONSTRUCTION
Full EDM & CNC’d in USA
Coated in NP3 (Nickel Teflon)

COMPATIBILITY
AR-15 Mil-Spec Style Fire Control Group
BATFE Compliant/Non-NFA

AR-10 Tac-Con™ 3MR with Right, Left and AMBI

 Handed Selector

Description

The 3MR trigger assembly with a right-handed selector is compatible with weapons using AR-10 & .308 small pin .154" mil-spec style fire control groups. The right-handed selector paddle will be on the left side of the rifle.

The 3MR is a drop-in 3-mode fire control system with Safe, Semi-Automatic, and Tac-Con™'s patented 3rd Mode. The 3rd mode has a positive reset that dramatically reduces the split times between shots. The positive reset characteristic is achieved by transferring the force from the bolt carrier through the trigger assembly to assist the trigger back onto the front sear. As a result, this gives the firearm the fastest reset possible. Both semi and 3rd mode positions exhibit a non-adjustable 4.5 pound trigger pull weight.

* Comes with Right Handed Selector Product Code: 3MRRH5102

Specifications

FEATURES
3 Mode Drop-In trigger
3rd Mode is Positive Reset
Semi-Auto is a Match Grade
Pull Rate 4 1/2 Pounds
Zero Take-Up & No Overtravel

CONSTRUCTION
Full EDM & CNC’d in USA
Coated in NP3 (Nickel Teflon)

COMPATIBILITY
AR-15 Mil-Spec Style Fire Control Group
BATFE Compliant/Non-NFA

AR-15 Right Hand Selector

 

AR-15 3MR RIGHT HAND SELECTOR

ITEM# SP-TAC-3MRAR15SPRH5003

$395.00

Quantity:      

 

AR-10 RIGHT  HAND SELECTOR

 

AR-10 3MR RIGHT HAND SELECTOR

ITEM# SP-TAC-3MRAR10SPRH5126

$395.00

Quantity:      
 

 

AR-15 Left Hand Selector

 

AR-15 3MR LEFT HAND SELECTOR

ITEM# SP-TAC-3MRAR15SPLH5003

$395.00

Quantity:      
 

 

 AR-10 LEFT HAND SELECTOR

 

AR-10 3MR LEFT HAND SELECTOR

ITEM# SP-TAC-3MRAR10SPLH5133

$395.00

Quantity:      

 

AR-15 AMBIDEXTROUS Selector

 

AR-15 3MR AMBI SELECTOR

ITEM# SP-TAC-3MRRH5092

$425.00

Quantity:      
 

 

 

AR-10 AMBIDEXTROUS Selector

 

AR-10 3MR AMBI SELECTOR

ITEM# SP-TAC-3MRRH5093

$425.00

Quantity:      

 

CMC 

AR15 OR AR10

Single Stage 3-3.5lb 

Curved Trigger Group (Small Pin) 

Plain

Single Stage Traditional Curved Trigger Group (Small Pin) for your AR15 or AR10. This model has 3-3.5lb break/weight point.

Item SP-DSGCMC91501

$189.95

Quantity:      

 

CMC 

AR15 OR AR10

Single Stage 3-3.5lb 

Curved Trigger Group (Small Pin)

OD 

Picture of CMC Single Stage 3-3.5lb Curved Trigger Group (Small Pin)

Single Stage Traditional Curved Trigger Group (Small Pin) for your AR15 or AR10. This model has 3-3.5lb break/weight point.

Item SP-DSGCMC91501ODG

$219.95

Quantity:      

 

CMC 

AR15 OR AR10

Single Stage 3-3.5lb 

Curved Trigger Group (Small Pin)

TAN

Picture of CMC Single Stage 3-3.5lb Curved Trigger Group (Small Pin)

Single Stage Traditional Curved Trigger Group (Small Pin) for your AR15 or AR10. This model has 3-3.5lb break/weight point.

Item SP-DSGCMC91501FDE

$219.95

Quantity:      

CMC

AR15 OR AR10

Single Stage 3-3.5lb 

Flat Trigger Group (Small Pin)

 

Picture of CMC Single Stage 3-3.5lb Flat Trigger Group (Small Pin)

Single Stage Tactical Flat Trigger Group (small pin) for your AR15 or AR10. This model has a 3 - 3.5lb break/weight point.

Item SP-DSGCMC91503 

$189.95

Quantity:      
TIMNEY

AR-10

DROP-IN  TRIGGER  MODULE

The Timney AR-10 trigger is a self-contained, 100% drop-in unit ready to install in an AR-10 rifle for an exceptionally smooth, crisp, single-stage trigger pull. No gunsmithing, fitting, or adjusting required. Pull weight is factory set at 4 pounds. Lightweight, 6061 T6 alloy housing is anodized for superior durability. Hammer is EDM machined from S7 tool steel that combines hardness to resist wear with superior impact resistance to withstand heavy use without chipping or breaking. Finally, a Teflon Nickel coating is applied to the hammer to deliver a super smooth trigger pull with superior lubricity. Other components are EDM cut from A2 tool steel, then heat treated to Rc 56-60 for longer service life. Trigger Module installs using your rifle's original hammer/trigger pins; proprietary design eliminates pin rotation and walkout.

4LB TRIGGER

SPECIAL ORDER 1-2 WEEKS

ITEM# SP-BN-4LB670

$259.95

Quantity:      

 

TIMNEY

AR-10

SKELETONIZED

DROP-IN  TRIGGER  MODULE

The Timney AR-10 trigger is a self-contained, 100% drop-in unit ready to install in an AR-10 rifle for an exceptionally smooth, crisp, single-stage trigger pull. No gunsmithing, fitting, or adjusting required. Pull weight is factory set at 4 pounds. Lightweight, 6061 T6 alloy housing is anodized for superior durability. Hammer is EDM machined from S7 tool steel that combines hardness to resist wear with superior impact resistance to withstand heavy use without chipping or breaking. Finally, a Teflon Nickel coating is applied to the hammer to deliver a super smooth trigger pull with superior lubricity. Other components are EDM cut from A2 tool steel, then heat treated to Rc 56-60 for longer service life. Trigger Module installs using your rifle's original hammer/trigger pins; proprietary design eliminates pin rotation and walkout.

4LB TRIGGER

SPECIAL ORDER 1-2 WEEKS

ITEM# SP-BN-SK4LB671

$299.95

Quantity:      
 
TIMNEY

AR-15  COMPETITION

DROP-IN  TRIGGER  MODULE

SMALL PIN (.152-.157)

Now shooters can replace creepy two-stage triggers with one that is smooth and breaks crisp. The trigger is factory preset with a pull weight of either 3 or 4 pounds. Installation is quick and no adjustments are necessary, 100% true drop-in trigger. The trigger module installs using your rifle's original hammer/trigger pins and the proprietary design eliminates pin rotation and walkout. Since it was founded in 1946, Timney Manufacturing has built a reputation based on the quality of its products. Because of the precision machining and workmanship that goes into each and every Timney product they are often referred to as "The World's Finest Triggers" and they are used exclusively by some of the world's best custom gun manufactures. Made in the USA.

3LB TRIGGER

SPECIAL ORDER 1-2 WEEKS

ITEM# SP-TT-3LB667S

$219.95

Quantity:      
 

4LB TRIGGER

SPECIAL ORDER 1-2 WEEKS

ITEM# SP-TT-4LB668S

$219.95

Quantity:      

4.5LB TRIGGER

SPECIAL ORDER 1-2 WEEKS

ITEM# SP-TT-45LB669S

$219.95

Quantity:      
 
TIMNEY

AR-15  COMPETITION

SKELETONIZED 

DROP-IN  TRIGGER  MODULE

SMALL PIN (.152-.157)

Now shooters can replace creepy two-stage triggers with one that is smooth and breaks crisp. The trigger is factory preset with a pull weight of either 3 or 4 pounds. Installation is quick and no adjustments are necessary, 100% true drop-in trigger. The trigger module installs using your rifle's original hammer/trigger pins and the proprietary design eliminates pin rotation and walkout. Since it was founded in 1946, Timney Manufacturing has built a reputation based on the quality of its products. Because of the precision machining and workmanship that goes into each and every Timney product they are often referred to as "The World's Finest Triggers" and they are used exclusively by some of the world's best custom gun manufactures. Made in the USA.

3LB TRIGGER

SPECIAL ORDER 1-2 WEEKS

ITEM# SP-TT-3LB661S

$279.95

Quantity:      
 

4LB TRIGGER

SPECIAL ORDER 1-2 WEEKS

ITEM# SP-TT-4LB664S

$279.95

Quantity:      

4.5LB TRIGGER

SPECIAL ORDER 1-2 WEEKS

ITEM# SP-TT-45LB665S

$279.95

Quantity:      
 

BOLT CARRIERS  &  BOLTS

 

.223 / 6.8 SPCII / 300 AAC BLACKOUT

JP Low Mass Stainless Carrier with key installed

Machined from 416 stainless steel for optimum durability and longevity. Does NOT have forward assist serrations but does feature dust cover notch. 100% increase in bearing surface for smoother operation, improved alignment and lower wear in the upper receiver. Recommended for competition and recreational use. To further enhance the performance of the JP Low Mass Carrier, we recommend the use of the JP Low Mass Buffer. Finished with a QPQ hardcoat process to yield incredibly hard and lubricious bearing surfaces.

Not for use in .308 AR-type rifles.
Weight: 6.25oz with key installed.

SPECIAL ORDER 2-4 WEEKS

ITEM# SP-JP-JPBC3

$225.95

Quantity:      

 

.308 / 7.62X51

JP Low Mass Stainless Carrier with key installed

JP .308 Low Mass Stainless Carrier with key installed. Requires DPMS bolt , firing pin and cam pin. BC-4 Bolt Carrier Assembly Group AR-10 Compatibility

This notice pertains to any rifle based on the large-format AR-10-type or LR-308 platform typically chambered in .308 Winchester, 7.62x51 NATO or other cartridges requiring the longer magazine format. Be aware that these receiver platforms are not standardized like the AR-15/M16 platform for which most parts are cross-compatible. Before ordering accessories and parts for your large-format rifle, make sure the parts are compatible with your particular platform. The JPBC-4A complete bolt carrier assembly and its parts are compatible with the DPMS family of AR-10 products. With the Armalite/Rock River family of large-frame receivers, this assembly can only be used as a complete bolt carrier assembly group. Interchanging individual components will result in an unsafe configuration. DO NOT under any circumstances mix and match components between the platforms. Only use the complete JP bolt carrier assembly in the Armalite/Rock River platforms.

SPECIAL ORDER 2-4 WEEKS

ITEM# SP-JP-JPBC4

$269.95

Quantity:      

 

.223

BOLT & BOLT CARRIER ASSEMBLY

LOW MASS

Complete bolt carrier assembly with JPBC-2 .223 LOW Mass Carrier and JPEB-223 JP Enhanced Bolt™ with cam pin, firing pin and firing pin retainer. Complete LOW Mass Bolt Carrier Group

SPECIAL ORDER 2-4 WEEKS

ITEM# SP-JP-JPBC3A

$335.95

Quantity:      

 

.308 / 7.62X51

BOLT & BOLT CARRIER ASSEMBLY

LOW MASS

Complete bolt carrier assembly with JPBC-4 .308 Low Mass Carrier and JPEB-308 JP Enhanced Bolt™ with cam pin, firing pin and firing pin retainer.

BC-4 Bolt Carrier Assembly Group AR-10 Compatibility

This notice pertains to any rifle based on the large-format AR-10-type or LR-308 platform typically chambered in .308 Winchester, 7.62x51 NATO or other cartridges requiring the longer magazine format. Be aware that these receiver platforms are not standardized like the AR-15/M16 platform for which most parts are cross-compatible. Before ordering accessories and parts for your large-format rifle, make sure the parts are compatible with your particular platform. The JPBC-4A complete bolt carrier assembly and its parts are compatible with the DPMS family of AR-10 products. With the Armalite/Rock River family of large-frame receivers, this assembly can only be used as a complete bolt carrier assembly group. Interchanging individual components will result in an unsafe configuration. DO NOT under any circumstances mix and match components between the platforms. Only use the complete JP bolt carrier assembly in the Armalite/Rock River platforms.

SPECIAL ORDER 2-4 WEEKS

ITEM# SP-JP-JPBC4A

$459.95

Quantity:      

 

.223/5.56 / 300 AAC BLACKOUT ENHANCED BOLT 

WITH COMPLETION GROUP

JP EnhancedBolt™ assembly NIB completion group, includes firing pin, cam pin and retainer pin, .223/5.56 caliber. This version of the bolt is compatible with any AR-15 platform using a Mil-spec bolt carrier and sub-components.

SPECIAL ORDER 2-4 WEEKS

ITEM# SP-JP-JPBCEB223

$144.95

Quantity:      

.308  ENHANCED BOLT

WITH COMPLETION GROUP

JP EnhancedBolt™ assembly completion group, includes firing pin, cam pin and retainer pin, .308 Win. caliber. The .308 version is compatible with the JP LRP-07 and the DPMS LR-308 platforms (or clones thereof) only and cannot be used to replace bolts in the Armalite AR-10 platform (or clones thereof).

SPECIAL ORDER 2-4 WEEKS

ITEM# SP-JP-JPBCEB308

$239.95

Quantity:      
 

 

 

 

SIGHTS

Magpul

MAGPUL MBUS 

Pro Offset Back-Up Front and Rear Sight Set

FLAT BLACK

MBUS® Pro Offset Sight – FrontMBUS® Pro Offset Sight – Rear

The MBUS Pro Offset Front Sight features durable Melonited steel construction, positive detented lockup when deployed, tool-less adjustment of the front post for easy zeroing, and a low profile footprint to ensure compatibility and reduce interference with most rifle setups.

ITEM# SP-DSGMGBUSPRO-OFFSET

$179.95

Quantity:      
 

Magpul

MBUS® - Magpul® Back-Up Sights

Front & Back

FLAT DARK EARTH

MBUS® Sight – Front

ITEM# SP-DSG-MPBODE

$109.95

Quantity:      

 

Magpul

MBUS® - Magpul® Back-Up Sights

Front & Back

FLAT BLACK

MBUS® Sight – Front

ITEM# SP-DSG-MPBOB

$109.95

Quantity:      
 

 

 

MISC.

FOR ALL 

AR15 M4 AR10 & .308's

Ergonomic Combat Sniper Pistol Grip

"THE BEST GRIPS WE FOUND"

"ONE  OUTSTANDING  AR  GRIP"

HIGH QUALITY - AFFORDABLE

ITEM# SP-UTGARGRIPBLK

$44.95

Quantity:      

AR15/M16 

Ergonomic Combat Sniper Pistol Grip

FLAT DARK EARTH

ITEM# SP-UTGARGRIPFDE

$44.95

Quantity:      

 

Troy Ambidextrous Bolt Release

Easily release bolt with either left or right hand. Streamlines firearm clearing and reloads after a malfunction. Improved control without hand changeovers. Made in the U.S.A. *Lifetime limited warranty

ITEM# SP-SBOL-AMB-00BT-00

OUR PRICE

$29.95

Quantity:      

 

Troy Enhanced Trigger Guard


Allows shooter to access trigger while wearing a glove. Also rotates down much like a standard trigger guard. Fills width gap on receivers. No sharp edges or corners. Made in the U.S.A. *Lifetime limited warranty

ITEM# SP-SGUA-AMB-00BT-00

OUR PRICE

$29.95

Quantity:      

 

 

                               

ABOUT  SIGHTPICTURE         AMERICAN  MILITARY  PATCH  GUIDE         CONTACT  US         GUARANTEE      LAY AWAY PLAN    RETURNS/WARRANTY    WEBSITE COPYRIGHT @1995 - 2015